Комментарий

Привязку иглы и автостарта рекомендуется осуществлять до подключения цепей запуска на последнем (аналогично привязке ТОР). https://author-alarm.atlassian.net/browse/TST-2933 https://author-alarm.atlassian.net/browse/TST-2955 https://author-alarm.atlassian.net/browse/TST-5301 https://author-alarm.atlassian.net/browse/TST-8759

To turn on the ignition, press the START / STOP button 3 times at intervals of no more than one second. To activate the option "seat heating" during Autostart operation, you must enable the 16th menu item (17th - disable) (available of this function depends on the vehicle configuration). ATTENTION!!! When AUTOSTART finishes its work automatical opening of central lock is possible. This function can be disabled in car settings menu. Changing Settings for Engine runing time with Accelerator and Brake pedal: • Switch OFF the ignition. • Press the ACCELERATOR pedal as far as it can go. • Switch ON the ignition without starting the engine. • Indication signals will be provided every 3 seconds. • Release the accelerator pedal. • To set the duration of engine operation, press the BRAKE pedal the appropriate number of times (see programming table) with pauses no longer than 2.5 seconds. Every time you press the BRAKE pedal, it is confirmed by the AUTOSTART indication signal on the dashboard. When the installation is finished, wait for the repeated indication that corresponds to the programmed value. • Switch OFF the ignition. If you press the BRAKE pedal once, it means the engine will work for 5 minutes. Second, third and fourth pressing add 5 minutes each. Fifth and subsequent pressings add 10 minutes to the duration time. For instance, if you want to set the duration for 20 minutes, press the brake pedal 4 times, and 8 times for 60 minutes.