Комментарий

Обходчик старого образца. Чек-лист: https://author-alarm.atlassian.net/wiki/spaces/AUTOSTART/pages/363888641/BMW+X6+F16+2018+3.0+13.12.18 https://author-alarm.atlassian.net/browse/TST-2699 https://author-alarm.atlassian.net/browse/TST-7216 https://author-alarm.atlassian.net/browse/TST-8759 https://author-alarm.atlassian.net/browse/TST-8540

Attention! When AUTOSTART finishes its work automatically opening of central lock is possible. This function can be disabled in car settings menu. Attention! Driver's door pin-switch should be connected in order to turn off external lighting after engine stop. Changing Settings for Engine running time with Accelerator and Brake pedal: • Switch OFF the ignition. • Press the ACCELERATOR pedal as far as it can go. • Switch ON the ignition without starting the engine. • Indication signals will be provided every 3 seconds. • Release the accelerator pedal. • To set the duration of engine operation, press the BRAKE pedal the appropriate number of times (see programming table) with pauses no longer than 2.5 seconds. Every time you press the BRAKE pedal, it is confirmed by the AUTOSTART indication signal on the dashboard. When the installation is finished, wait for the repeated indication that corresponds to the programmed value. • Switch OFF the ignition. It is recommended to bind the IGLA and AUTOSTART before connecting the start circuits on the latter. If you press the BRAKE pedal once, it means the engine will work for 5 minutes. Second, third and fourth pressing add 5 minutes each. Fifth and subsequent pressings add 10 minutes to the duration time. For instance, if you want to set the duration for 20 minutes, press the brake pedal 4 times, and 8 times for 60 minutes.