Комментарий

Привязку иглы и автостарта рекомендуется осуществлять до подключения цепей запуска на последнем. https://author-alarm.atlassian.net/browse/TST-3084 Если в меню а/м не включен пункт "выключение а/м после открытия двери", то АСС выключается только через 10 минут после завершения автозапуска.

To activate the option "seat heating" during Autostart operation, you must enable the 16th menu item (17th - disable) (available of this function depends on the vehicle configuration). To turn on the ignition, press the START / STOP button 3 times at intervals of no more than one second. New generation of the key reader. Changing Settings for Engine runing time with Accelerator and Brake pedal: • Switch OFF the ignition. • Press the ACCELERATOR pedal as far as it can go. • Switch ON the ignition without starting the engine. • Indication signals will be provided every 3 seconds. • Release the accelerator pedal. • To set the duration of engine operation, press the BRAKE pedal the appropriate number of times (see programming table) with pauses no longer than 2.5 seconds. Every time you press the BRAKE pedal, it is confirmed by the AUTOSTART indication signal on the dashboard. When the installation is finished, wait for the repeated indication that corresponds to the programmed value. • Switch OFF the ignition.